If the White Rabbit in Alice’s Adventures in Wonderland had used AgentDA 2.1 and a PowerBook, he would have always been on time.
AgentDA 2.1, from Team Building Technologies, Inc., is a very accessible and easy-to-use electronic scheduler and time manager desk accessory for any Macintosh. You can use AgentDA 2.1 to track appointments, prepare to-do lists, schedule meetings and workgroups, and plan and track personal and group activities.
AgentDA 2.1 is plain, straight forward, and very flexible. You can effortlessly show any number of days or weeks, set up reminder alarms to go off before an activity occurs (and pop on a snooze button when you want to procrastinate), and even search your calendar for activities.
Featured feats…
If you’re the kind of person who thinks day timers turn us into slaves of time, AgentDA offers the List Display. (See Figure 1.) You’ll find the List Display handy if you like to block out chunks of things to do rather than break down and fit activities into 24-hour time slots.
On the List Display, AgentDA offers you a few ways to show the amount of time an activity takes. For example, you can show the start time at the top and finish time at the bottom of each activity, or you can show the entire range of time each activity requires at the top. You can even indicate the length of time each activity takes on a little clock icon that shows the length of time blacked out.
Figure 1 here
If you’re the kind of person who thinks to-do lists are a crutch for those who really want to organize their lives with day timers, AgentDA offers the Grid Display. (See Figure 2.) You’ll like the Grid Display if you need to view your activities by the hour, by the half hour, or even by the quarter hour. Of the two displays, the Grid Display looks more like an appointment diary, so if you presently use one, you’ll likely find the Grid Display familiar and more to your taste.
Figure 2 here
AgentDA also provides a helpful tool bar along the right edge of both displays. Buttons on the tool bar enable you to toggle between displays, skip to any day on your calendar, and select the number of days and weeks you want to show at one time (from one to seven days, and from one to five weeks).
To toggle to the List Display, for example, all you do is click on the button with the vertical lines located at the top of the tool bar. (See Figures 1 and 2.) To toggle to the Grid Display, all you do is click on the button with the horizontal lines that’s located just below the List Display button.
You can also use the Today Button just below the Grid Display button to instantaneously go to and show the current day from wherever you are in your calendar. When you click on the Today Button, the current day box is displayed and its contours blink three times, helping you to quickly zero in on TODAY.
Another similar button on the tool bar—the Calendar Button—enables you to go to and display any other day on your calendar.
You can also use the vertical and horizontal number bars on the tool bar to select the number of days and the number of weeks, respectively, you want to show at one time on a display. To show, for example, schedules for Monday, Tuesday, and Wednesday for the next two weeks, you click on 3 on the vertical, and 2 on the horizontal number bar.
The answer to why you would ever want to show fewer than five days per week on a display may seem obscure at first. But if you work part-time or at some point need to see quickly what your Mondays look like for the rest of the month, the day number bar makes sense.
Make a date…
To enter an activity, double-click on any empty block in a day box on the List or Grid Display. When the Description Activity dialog pops open, you can type a description of your activity (up to 255 characters long), set the start time and duration of your activity, set an alarm to remind you about an activity if you want, and specify the format and layout of your activity description when it’s displayed in each day box. (See Figure 3.)
Figure 3 here
The first time I used the Description Activity dialog, I discovered a bewildering and, in my opinion, annoying limitation in AgentDA: You cannot enter 12:00 AM as a finish time for an activity, since technically speaking, 12:00 AM marks the beginning of a new day.
When I first attempted to specify 16 hours as the duration time of an activity that started at 8:00 AM (and thus finished at 12 midnight), AgentDA barked and abruptly reset my start time to 7:59 AM and my finish time to 11:59 PM. After tinkering with the duration time for a while, I realized the problem. I’ve always considered 12 midnight to be 12 midnight, not 12:00 AM—the start of a new day.
When you enter invalid start and duration times, AgentDA should display an information dialog that tells you that you can’t specify 12 midnight as a finish time, instead of barking and abruptly “correcting” your values for you. Better yet, AgentDA should allow you to enter a duration time that extends over more than a single 24-hour period. Rome, after all, wasn’t built in a day.
You can also use the Description Activity dialog to set up regularly scheduled activities. In AgentDA, you schedule activities that occur regularly by duplicating them. For example, suppose you want to schedule your Mac user group monthly meeting (mine, MacValley, meets on the first Wednesday of each month) on your calendar for the next year, starting on Wednesday, June 2, 1993. First, you open the Description Activity dialog for a block of time between 7:30 and 10:00 pm on Wednesday, 2 June 1993, and fill in the information about the MacValley Users Group meeting.
When you click on the Duplicate check box, and the Duplicate dialog pops up, you specify the number of times the activity is to occur, in this case 12 times, and the frequency of the activity, in this case every month. (See Figure 4.) As a result, the MacValley Users Group meeting is automatically slotted in from 7:30 PM to 10:00 PM every first Wednesday of the month from June 1993 through June 1994.
Figure 4 here
The trouble with Team Building Technologies’ implementation of this feature, however, is that once they’re created, duplicated activities are not linked together. So, suppose that after entering your duplicated activities you decide to change the duration of the MacValley Users Group Meeting from 2 and a half to 3 hours. You can’t just open a duplicated activity, change it, and thus change all related recurring activities. You must find each activity and update each one individually.
On the other hand, it’s nice to be able to edit, copy, and move duplicated activities individually. A cross-reference, hypertext link, or internal Publish and Subscribe feature, that you could select optionally when you duplicated activities, would be a welcome feature.
Quick change artistry
To move an activity, all you do is click and drag it to a new time or day. The time of the activity is retained depending on where you move it. You copy activities just as you move them, only you hold down the option key when you click and drag. To move and copy activities from one open calendar to another (yes, you can open more than one at a time), use the standard Macintosh Cut, Copy, and Paste editing commands. To delete an activity, all you do is highlight it and press the delete key.
Checking off activities on your calendar is as easy as moving and copying them. All you do is highlight the activity and select Done on the AgentDA menu. A small check mark appears to the left of the activity. (You can also check off activities on the Description Activity dialog, but that’s a much less convenient method.)
AgentDA’s trio of find commands is probably its best and most handy set of features. AgentDA provides a Find To Do’s command, that enables you to find and highlight activities that are not checked off. AgentDA also provides a Find and Find Again command, which lets you find activities based on a text string you provide. You can specify the period of time between which you want to search, and you can search for activities serially or all at once.
AgentDA also offers a full range of customizing commands. You can specify the format of dates (the European day-month-year format as well as the American month-day-year format, for example), and you can set the typeface, size, and style of titles and activity descriptions in your calendar.
You can also specify settings to be used on your calendar by default, such as the number of lines shown, whether or not text in day boxes is wrapped to the next line, and whether or not the time is displayed in day boxes. You can also choose the alarm sound you want to use by default, and you can set a default for how soon before an activity AgentDA is to issue an alarm.
While customizing commands are copious in AgentDA, printing features on the other hand, are limited. AgentDA provides only two ways to print your calendar. You can either print the part of your calendar as shown in your List or Grid Display, or you can print each day in your List or Grid Display on a separate sheet. When you use the latter method to print your calendar, activities for each day are printed in a column on the left of each sheet, and a box for notes is printed on the right.
Regardless of the method you use, the part of your calendar that’s printed is defined by the number of days and weeks you select on the day and week number bars, up to a maximum of 35 days.
You can also specify header and footer text to be printed at the top and bottom of printed sheets. Unfortunately, to use this feature you must enter special characters (an ampersand and a code letter) to define and format the header and footer text—a user-hostile, DOS-like, implementation that many Macintosh users may find perturbing.
That’s not the only annoying printing problem. When I attempted to print five days in one week on separate sheets, the result wasn’t exactly what I intended. The AgentDA Reference Manual implies that if you specify this method of printing and select Pages-All on the Print dialog, all pages displayed in the List Display (within the range you specify on the vertical and horizontal number bars) are printed.
However, when I selected this method and selected Pages-All on the Print dialog, only the first day shown in the List Display printed. To get all pages in the List Display to print, I had to specify the range of days to print. Either I’m missing something, the manual is incorrect, or there’s a bug in the Print command.
In any event, after you set up activities on your calendar, all you need to do then is wait for them to happen. When a reminder alarm you set goes off, AgentDA displays an alarm dialog. (See Figure 7). The alarm dialog offers you a few choices. You can click on the “snooze” check box to instruct AgentDA to wait and issue the alarm again after a few minutes; you can completely remove the activity from your calendar; or you can check the activity off and forget about it!
The good book
In spite of offering some possibly misleading information about printing separate sheets, the AgentDA Reference Manual is very useful. It is pleasingly laid out, copiously illustrated, and presents all of AgentDA’s features and functions logically and thoroughly.
The bottom line
Although it’s not a sophisticated scheduling utility, AgentDA’s accessible, easy-to-use, and very flexible set of features make it a helpful tool for any Macintosh owner. Mac Plus, Classic, and PowerBook owners especially, though, will like AgentDA for its low 140K consumption of RAM and its coherent, uncluttered displays.
Newsletter editors: The following note is for your information only; it is unnecessary to reproduce it with this article - (in fact, it looks silly if you do add it to the article)
This article may be reproduced and/or published in any media--print or electronic such disks or CD-ROM-- by any non-profit organization as long as authorship and copyright credits are retained. Please send one copy of the newsletter in which it appears to:
Editor, MacValley Voice
12312 Kenny Drive
Granada Hills, CA 91344-1833
If your user group does not yet exchange newsletters with MacValley Users Group, write to the address above and we can arrange an exchange.
